Click image to view full size image
FEATURES
*External single line internal TDS monitor that is ideal for most water purification systems.
*Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point.
*User-defined set points (any even number between 2 and 200).
SPECIFICATIONS
Range: 0-200 ppm (mg/L)
Accuracy: +/- 2%
Calibration: Factory calibrated
Alert: Warning light, optional alarm
Light color: Either red or yellow
Light function: Either flashes or is steady
Alarm: Beeps for 20 seconds, then goes silent
Power Source: AC 110V / 220V ± 2%
Cable Length: 62.86 cm (24.75")
Fittings: 1/4" standard, also available with 3/8" or 1/2"
Max. Water Pressure: 200 PSIG (at 23° C with a 1/4" fitting)
Dimensions: 12.9 x 7.3 x 6 cm (5 x 2.9 x 2.4 in. )
Weight: 340 g (12 oz. )
*External single line internal TDS monitor that is ideal for most water purification systems.
*Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point.
*User-defined set points (any even number between 2 and 200).
SPECIFICATIONS
Range: 0-200 ppm (mg/L)
Accuracy: +/- 2%
Calibration: Factory calibrated
Alert: Warning light, optional alarm
Light color: Either red or yellow
Light function: Either flashes or is steady
Alarm: Beeps for 20 seconds, then goes silent
Power Source: AC 110V / 220V ± 2%
Cable Length: 62.86 cm (24.75")
Fittings: 1/4" standard, also available with 3/8" or 1/2"
Max. Water Pressure: 200 PSIG (at 23° C with a 1/4" fitting)
Dimensions: 12.9 x 7.3 x 6 cm (5 x 2.9 x 2.4 in. )
Weight: 340 g (12 oz. )